
$12 – $20
Compact WiFi smart plug with 16A/3840W capacity for controlling appliances via app or voice.
You want local control without cloud dependency
Millisecond response times on local network - works even when internet is down
You use Apple HomeKit for automation
Native HomeKit support with quick QR code setup - works in Home app scenes and automations
You want simple WiFi-based smart plug without hub
Works directly over WiFi - no hub or bridge required, just connect to 2.4GHz network
You want budget HomeKit plug with energy monitoring
Affordable HomeKit + Alexa + Google plug with real-time power tracking in Meross app
You need compact size for extension cords
Slightly too large at 2.6x2.6x2.3 inches - may block adjacent outlets on power strips
You rely on Homebridge or Home Assistant
Firmware updates frequently break third-party integrations - use Meross app or native HomeKit instead
You have weak WiFi signal at plug location
2.4GHz only with reported signal issues - even near router, signal around 70%
You need energy data in HomeKit app
Energy monitoring only in Meross app - not exposed to HomeKit, Alexa, or Google Home
After firmware update for non-native HomeKit plugs, device won't work in HomeKit anymore
GitHub IssuesPlug stops working after adding HomePod Mini - becomes unavailable despite working fine for 2+ years
GitHub IssuesFirmware updates break Homebridge integration - MSS210 stopped working after update
GitHub IssuesLink Error when trying to connect Meross account to Alexa skill
User ReportsPlug too large for extension cords - blocks adjacent outlets
commonCause: Physical design choice - 2.6x2.6x2.3 inch form factor
Firmware updates break third-party integrations
commonCause: Meross changes local API with firmware updates without backward compatibility
WiFi signal issues even close to router
commonCause: 2.4GHz antenna limitation - signal around 70% even in same room as router
Plug turns off by itself and becomes unavailable
rareCause: WiFi connectivity drop or firmware bug - requires power cycle
Trying to connect to 5GHz WiFi network
Setup fails - device cannot find network
Tip: MSS210 only supports 2.4GHz. Split your WiFi bands or temporarily disable 5GHz
Router has access control or MAC filtering enabled
Plug cannot connect even with correct credentials
Tip: Disable access control, MAC filtering, and firewall during initial setup
Expecting energy monitoring in HomeKit
Power data not visible in Apple Home app
Tip: Energy monitoring only works in Meross app - use that for power tracking
LED turns solid red after setup
Device offline and not responding
Tip: Check WiFi is working, factory reset by holding button 5 seconds, try setup again
Remote access from outside home, voice commands, initial account setup
Local control via Meross app on same network with millisecond response, HomeKit control, schedules
Meross collects account info and device usage data including energy consumption
Firmware updates can change local API behavior without notice, affecting third-party integrations
Meross MSS110
If: Need smaller size for extension cords
Kasa EP25
If: Need more reliable HomeKit integration
Eve Energy
If: Want energy monitoring visible in HomeKit
You want budget HomeKit plug with energy monitoring
Good value for HomeKit + energy monitoring combo if you use Meross app for power data
You need compact plug for power strips
Too large for tight spaces - get MSS110 or Kasa EP10 for extension cords
You rely heavily on Homebridge or Home Assistant
Firmware updates repeatedly break integrations - consider devices with stable local API
You use native HomeKit and Meross app
Works reliably with native apps - 24-month warranty and good local control
Common causes: firmware update broke integration, HomePod Mini conflict, or WiFi issues. Try: power cycle the plug, restart HomePod, or factory reset and re-add.
Source: Apple CommunityYes for local control. When on the same WiFi network, the Meross app controls devices with millisecond response even without internet. Remote access requires internet.
Source: AppleInsider ReviewNo, MSS210 only supports 2.4GHz WiFi. If your router combines both bands under one SSID, you may need to split them.
Source: Product SpecificationsMSS210 is larger but has energy monitoring. MSS110 is more compact (fits extension cords better) but has no power tracking. Both support HomeKit, Alexa, and Google.
Source: Product ComparisonYes, the MSS210 tracks real-time and historical power consumption in the Meross app. However, this data is NOT exposed to HomeKit, Alexa, or Google Home - only in the Meross app.
Source: Product Manual